RADIO OVERVIEW

WALL CHARGER

Note: Do not use the wall charger if using lithium-ion (Li-Ion) or nickel-metal hydride (NiMH) batteries. The wall charger is for a nickel-cadmium (NiCd) battery only.

To Charge the Battery:

1Turn the radio off.

2Lift the dust cover to expose the audio accessory connector.

3Insert the charging adapter into the accessory connector.

4Plug the charging adapter into an electrical outlet.

The LED on the charging adapter lights Red while the charger is plugged into an electrical outlet.

Note: Do not leave the charger connected to the radio when it is not connected to the electrical outlet.

12

5Unplug the charger from the electrical outlet and radio after 10 hours.

Note: After the initial charge of 14 to 16 hours, do not charge the battery more than 10 hours.

DESKTOP CHARGERS

Rapid Charger

1Turn the radio off.

2Place the battery, with or without the radio, in the charger pocket.

The charger LED indicates the charging progress.

LED color

Status

No LED Indication

Battery inserted incorrectly

 

or battery not detected.

Single Green Flash

Successful charger

 

power-up.

 

 

Flashing Reda

Battery unchargeable or not

 

making proper contact.

 

 

Steady Red

Battery is in Rapid charge

 

mode.

English

Page 14
Image 14
Motorola PR400 manual Wall Charger, Desktop Chargers, Rapid Charger