GETTING STARTED
SELECT AN LTR CHANNEL/ TALKGROUP
Your PR400 radio can be programmed with up to 4 LTR sites and a maximum of 16 talkgroups, in total, across one or more sites (up to a total of 4 sites).
To select an LTR channel/talkgroup:
Turn the Channel Selector knob to select the appropriate LTR channel/talkgroup.
Press any of the programmable buttons to access a preprogrammed talkgroup. Then use the Channel Selector knob to select the appropriate LTR channel/talkgroup.
Note: The second option is available only if your radio has been programmed with a specified LTR channel/ talkgroup.
Note: Site/talkgroup settings are programmed by your dealer.
20
SELECT A CONVENTIONAL RADIO CHANNEL
Your radio offers 16 conventional channels.
To select a channel, turn the Channel Selector knob clockwise or counterclockwise until you reach the desired channel.
RECEIVE A CONVENTIONAL OR LTR CALL
1Turn your radio on.
2Adjust the radio’s volume (see page 19).
3Turn the Channel Selector knob to select the appropriate LTR channel/talkgroup.
•Make sure the PTT button is released.
4Listen for voice activity.
•The LED indicator flashes red while your radio is receiving.
5To respond, hold the radio vertically 1 to 2 inches (2.5 to 5cm) from your mouth. Press the PTT button to talk; release it to listen.
English
