Motorola PTP 600 Series

5.4.3 5.8GHz Specific Frequency Planning Considerations

Adjustment of the lower center frequency allows the operator to slide the available frequency

settings up and down the 5.8 GHz band. See Figure 15.

Figure 15 - 5.8 GHz Available Spectrum Settings

5.4.4 Raster Considerations

The PTP 600 Series Bridge 5.8 GHz variant operates on a 10 MHz channel raster that is set

to even center frequencies. See Figure 15.

5.4.5 Transmit Power Reduction at the Band Edges

Operation at or near the 5.8 GHz band edges can results in a lower maximum transmit power.

In some configurations the PTP 600 Series Bridge solution reduces the power when

operating at the edge channels. The amount of reduction, if any, is dependant on the region

code of the region of operation. This currently only affects systems configured with Region

Code 1.