92
8.3.1.6 Telecoms Configuration Page
The Telecoms page is only available when the Telecoms Interface has been set to either T1
or E1 in the Installation Wizard.
It displays the interface setting and line code for the available telecoms channels. The PTP
600 Series Bridge is able to support two T1 or E1 channels. However, in the Lite configuration
one of these channels is disabled. The channels are referred to as "Channel A" and "Channel
B".
The "Channel B" configuration and controls will be displayed only when the second channel is
enabled.
Figure 41 - Telecoms Data Entry