User Settings, Setting Description | Motorola QIP6200/QIP64xx

User Settings

Setting	Description
TV TYPE	Sets the aspect ratio. The front panel display indicates the
	type you select. The default is 16:9.
	Options are 16:9 for wide screen TVs, or 4:3 LETTERBOX
	or 4:3 PAN/SCAN for standard TVs:
	• 4:3 LETTERBOX fits wide screen programming on the
	screen by placing black bars at the top and bottom.
	• 4:3 PAN/SCAN fills the screen by cropping the left and
	right edges of wide screen programming.
HDMI/YPbPr	Sets the video display format for the component video
OUTPUT	outputs. The front panel display indicates the format you
	select. Options are 1080i, 720p, 480p, or 480i. The default is
	1080i.
	Some TVs support preferred display formats only. Check the
	TV’s user manual for more information about your TV’s
	supported display formats.
	If you are not using a high-definition television with the
	QIP6xxx , selecting a format other than 480i causes the
	on-screen display to go blank. If this occurs, you can view
	the settings on the front panel display to change the YPbPr
	OUTPUT back to 480i.
	If you are not using the HDMI video connection, the
	HDMI/YPbPr OUTPUT setting displays as YPbPr OUTPUT.

14

Image 20

Motorola QIP6200/QIP64xx manual User Settings, Setting Description, HDMI/YPbPr

Contents

User Guide Repairs Important Safety Instructions Canadian Compliance Regulatory InformationDeclaration of Conformity Software License Software License Contact Us Contents QIP6200/QIP64xx User Guide Connecting an A/V Receiver, TV, and VCR Connecting a Stereo TVConnecting a Stereo TV and Stereo VCR Introduction QIP6200/64xx Front and Back Panels Front Panel DescriptionFront Panel Item Description QIP6200/QIP64xx User Guide Enabled Back Panel DescriptionBack Panel Program not supported by all program guides Description Turning Power On and Off Adjusting the VolumeChanging Channels Electronic Program Guide What is DVR? Digital Video Recorder DVR QIP64XX Models only Simultaneously Record Two Shows Simultaneously Record Shows and Watch a Recorded Program Optimizing Your SET-TOP for HIGH-DEFINITION TV This screen appears if the Hdmi port is active To exit the menu and save your settings, press the Power or HDMI/YPbPr User SettingsSetting Description Closed Restore ALL ON-SCREEN Graphics Connecting Your SET-TOP Important Safety Considerations Video Connection Options Component video YPbPr Hdtv and SdtvHdmi or Ieee 1394 Digital Hdtv and Sdtv Video Sdtv RF Output Sdtv If You HaveFollow Hdtv only Recording Your Connections QIP6200/QIP64xx User Guide Connecting Your SET-TOP to AN Hdtv Video only Ieee Connecting Hdtv Video OnlyComponent Video YPbPr DVI or Hdmi Connecting Your SET-TOP to AN Hdtv Audio only Connecting Hdtv Audio Only Connecting Your SET-TOP to AN A/V Receiver Audio only Connecting an A/V Receiver Audio Only Connecting Your SET-TOP to a Stereo TV Connecting a Stereo TV Connecting Your SET-TOP to a Stereo TV and Stereo VCR QIP6xxx Series Connecting a Stereo TV and Stereo VCR Connecting Your SET-TOP to AN A/V RECEIVER, TV, and VCR Connecting an A/V Receiver, TV, and VCR Data Features Data Devices Troubleshooting Problem Possible SolutionPower on Does not work When viewing There is no audioChannels From the center There is no video On the TV screen There are no Graphics, closedCaptions, or Program guides Bars above Below the pictureBars on all four Sides of the picture Video is horizontally distorted on the Hdtv screen Set-top is making a humming noise Mgbi