Motorola SB5100 manual Setting Up a USB Driver in Windows XP

Introduction Before You Begin

Installation & Configuration

Troubleshooting FAQ Glossary License

Setting Up a USB Driver in Windows XP

Be sure the SURFboard Cable Modem CD-ROM is inserted into the CD-ROM drive before you plug in the USB cable. A few seconds after you complete the USB connection, the Found New Hardware Wizard window is displayed.

1Be sure “Install the software automatically” is selected.

2Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is successful, the window at bottom left is displayed.

3Click Finish to complete the installation. Otherwise, be sure the SURFboard Cable Modem CD-ROM is correctly inserted in your CD-ROM drive.

When you finish setting up the USB driver, you can continue with “Configuring TCP/IP in Windows XP” on page 30.

Although your SURFboard cable modem model number may be different than in the images in this guide, the procedure is the same.

.

SB5100 Series Cable Modem User Guide 21