Overview Installation Troubleshooting Contact FAQ Specifications Glossary License

Configuration: Basic Gateway TCP/IP Wireless USB

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. THE UNIT MUST NOT BE EXPOSED TO DRIPPING OR SPLASHING. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON THE UNIT.

CAUTION: TO ENSURE REGULATORY AND SAFETY COMPLIANCE, USE ONLY THE PROVIDED POWER AND INTERFACE CABLES. DO NOT CONNECT THE PLUG INTO AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE PLUG CAN BE FULLY INSERTED WITH NO PART OF THE BLADES EXPOSED.

CAUTION: DO NOT OPEN THE UNIT. DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE INSTALLATION AND TROUBLESHOOTING INSTRUCTIONS. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION: CHANGES AND MODIFICATIONS NOT EXPRESSLY APPROVED BY MOTOROLA FOR COMPLIANCE COULD VOID USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

CAUTION: Exposure to Radio Frequency Radiation. To comply with the FCC RF exposure compliance requirements, the separation distance between the antenna and any person’s body (including hands, wrists, feet and ankles) must be at least 8 inches (20 cm).

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product.

Postpone cable modem installation until there is no risk of thunderstorm or lightning activity in the area.

Do not overload outlets or extension cords, as this can result in a risk of fire or electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous. They may result in a shock or fire hazard.

Route power supply cords so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords where they are attached to plugs and convenience receptacles, and examine the point where they exit from the product.

Place this equipment in a location that is close enough to an electrical outlet to accommodate the length of the power cord.

Place this equipment on a stable surface.

X

ii

SBG900 User Guide

Home Print Exit

Page 2
Image 2
Motorola SBG900 manual Home Print Exit

SBG900 specifications

The Motorola SBG900 is a versatile and robust cable modem with built-in Wi-Fi capabilities, designed to meet the growing demands of modern internet usage. Catering to both residential and small office environments, the SBG900 combines a cable modem and a wireless router in one streamlined device, offering an efficient solution for networking needs.

One of the main features of the SBG900 is its DOCSIS 2.0 compliance, which allows for high-speed internet access with data transfer rates reaching up to 30 Mbps. This enables users to enjoy seamless streaming, online gaming, and quick downloads without interruptions. The device is also backward compatible with earlier DOCSIS standards, ensuring that it remains functional even with older cable networks.

Another notable aspect of the Motorola SBG900 is its built-in Wi-Fi capabilities. The device supports the IEEE 802.11b/g wireless standards, allowing for wireless speeds of up to 54 Mbps. This makes it easy to connect multiple devices throughout the home or office, including laptops, smartphones, tablets, and smart TVs. The wireless range is enhanced by its internal antennas, offering reliable connectivity in various locations within the premises.

Security is a critical consideration for any networking device, and the SBG900 addresses this need with multiple features. It comes equipped with Wi-Fi Protected Access (WPA/WPA2) and Wired Equivalent Privacy (WEP) encryption protocols, ensuring that both wired and wireless connections remain secure from unauthorized access. Furthermore, the device supports a built-in firewall, adding an extra layer of protection by controlling incoming and outgoing traffic.

The Motorola SBG900 also boasts a user-friendly web-based management interface, providing easy access to configuration settings and status monitoring. Users can effortlessly manage their network, set up parental controls, prioritize devices using Quality of Service (QoS), and perform firmware updates.

In summary, the Motorola SBG900 stands out as a reliable solution for users seeking a powerful cable modem with integrated Wi-Fi capabilities. With high-speed internet access, robust security features, and ease of management, it serves as an ideal choice for anyone looking to enhance their connectivity experience. Whether for gaming, streaming, or general internet browsing, the SBG900 delivers performance and reliability that users can count on.