B
WPA/WPA2 Encryption | When using WPA or WPA2 authentication, these WPA |
| encryption modes can be set: TKIP, AES, or TKIP + AES. AES |
| (Advanced Encryption Standard) provides the strongest |
| encryption, while TKIP (Temporal Key Integrity Protocol) |
| provides strong encryption with improved compatibility. The |
| TKIP + AES mode allows both TKIP and |
| connect. |
|
|
WPA | Sets the WPA |
Show Key | ASCII character string or a |
| specified when the Network Authentication method is WPA- |
| PSK. |
| Show Key - When selected, the WPA |
| displayed. |
|
|
RADIUS Server | Sets the RADIUS server IP address to use for client |
| authentication using the |
| (xxx.xxx.xxx.xxx). |
|
|
RADIUS Port | Sets the UDP port number of the RADIUS server. The default |
| is 1812. |
|
|
RADIUS Key | Sets the shared secret for the RADIUS connection. The key is |
| a 0 to 255 character ASCII string. |
|
|
Group Key Rotation Interval | Sets the WPA Group Rekey Interval in seconds. Set to zero to |
| disable periodic rekeying. |
|
|
WPA/WPA2 | The |
| wireless router can wait before |
| with the CPE. |
|
|
WEP Encryption | WEP Encryption enables or disables Wired Equivalent Privacy |
| encryption. |
|
|
Shared Key Authentication | The WEP protocol uses the Shared Key Authentication |
| protocol where the CPE sends an authentication request to |
| the access point. Then the access point sends a challenge text |
| to the CPE. |
| The CPE uses either the |
| challenge text and sends the encrypted text to the access |
| point. The access point decrypts the encrypted text and then |
| compares the decrypted message with the original challenge |
| text. If they are the same, the access point lets the CPE |
| connect; if it doesn’t match, then the access point does not let |
| the CPE connect. |
|
|
Wireless Pages • Wireless 802.11 Primary Network Page
Motorola SURFboard SBG941 Series Wireless Cable Modem Gateways • User Guide | 52 |
