B

Advanced Port Filtering Page

This page allows you to define port filters to prevent all devices from sending outgoing TCP/UDP traffic to the WAN on specific IP port numbers. By specifying a starting and ending port range, you can determine what TCP/UDP traffic is allowed out to the WAN on a per-port basis.

Note: The specified port ranges are blocked for ALL PCs, and this setting is not IP address or MAC address specific. For example, to block all PCs on the private LAN from accessing HTTP sites (or “web surfing”), set the “Start Port” to 80, “End Port” to 80, “Protocol” to TCP, select Enabled, and then click Apply.

 

Field Descriptions for the Advanced Port Filtering Page

Field

Description

 

 

Start Port

Enter the starting port number.

 

 

End Port

Enter the ending port number.

 

 

Protocol

Select TCP, UDP, or Both from the drop-down list.

 

 

Enabled

Select for each port that you want to activate the IP port filters.

 

 

Advanced Pages • Advanced Port Filtering Page

Motorola SURFboard SBG941 Series Wireless Cable Modem Gateways • User Guide

35

570280-001-a

Page 43
Image 43
Motorola SBG941E, SBG941UE manual Field Descriptions for the Advanced Port Filtering, Start Port, End Port, Protocol