B

Renewing Your IP Address in Windows XP or Windows Vista

1.Open a command prompt window.

A.From the Windows Taskbar, click Start to open the Start menu.

B.Select Run to open the Run window.

C.Type cmd in the Open entry box and click OK.

2.Type ipconfig /renew and press ENTER. A valid IP address should appear indicating that Internet access is available.

3.Type exit and press ENTER to close the command prompt window.

If, after performing this procedure, your computer cannot access the Internet, call your cable provider for help.

Setting Up a Wi-Fi Network

Do the following to set up a Wi-Fi network using the WPS button on the modem:

1.If necessary, power on the modem.

2.Power on the WPS-enabled devices you want to have access to the network, such as a PC or router.

The Wi-Fi network will automatically detect the WPS devices.

3.Press WPS button on the modem.

4.If applicable, press WPS button on the other WPS devices.

Wall Mounting the Modem

If you choose to wall mount the modem, do the following before starting:

Locate the unit as specified by the local or national codes governing residential or business cable TV and communications services.

Follow all local standards for installing a network interface unit/network interface device (NIU/NID).

Make sure the AC power plug is disconnected from the wall outlet and all cables are removed from the back of the modem before starting the installation.

Determine if you are mounting the modem horizontally or vertically.

Use M3.5 x 38 mm (#6 x 1½ inch) screws with a flat underside and maximum screw head diameter of 9.0 mm to mount the modem.

See the screw mounting dimensions below to properly mount the modem:

Installing the Modem • Setting Up a Wi-Fi Network

Motorola SURFboard SBG941 Series Wireless Cable Modem Gateways • User Guide

11

570280-001-a

Page 19
Image 19
Motorola SBG941E, SBG941UE, 570280-001-a manual Setting Up a Wi-Fi Network, Wall Mounting the Modem