Multiquip operation manual DCA-40SSAI Output Voltage Setup, 240/120V Hard Wire Hookup

DCA-40SSAI — OUTPUT VOLTAGE SETUP

240/120V Hard Wire Hookup

With the voltage selector set and locked at ‘single phase 240/120’ and using single phase 120 volts, the generator will provide three legs available with 100 amps each on three different circuits (Figure 18).

480/240V Hard Wire Hookup

With the voltage selector set and locked at ‘3 phase 480/ 277’ (Figure 19) and using the 3-phase 240 hookup, it will provide one circuit available at 108 amps with any two wires plus the ground (Figure 20).

When using the 3-phase 480 volts hookup, it will provide one circuit available at 50 amps with all three wires plus ground.

Figure 19. Voltage Selector Switch 480/277V Three Phase

Position

Figure 18. Hard Wire Hookup at 240/120V Position

Figure 20. Hard Wire Hookup at 480/240V Position

PAGE 36 — DCA-40SSAI — PARTS AND OPERATION MANUAL — FINAL COPY (07/09/01)