DCA-40SSAI — OUTPUT VOLTAGE SETUP

Voltage Selector Switch- 3 Phase 240/139V Position The following are additional voltages available when the volt- age selector switch is in the ‘3 phase 240/139V’ position.

Single Phase: 240V, 220V, or 208 Volt

This setting can provide single phase power at 240, 220, or 208 volts. After hooking up the hard wires to the lugs as shown in Figure 27, 240 volts can be obtained with the volt- age regulator knob turned toward maximum; 220 volts can be obtained with the voltage regulator knob is turned down; and 208 volts can be obtained with the voltage regulator knob is at the lowest setting.

Figure 27. Hard Wire Hookup for Single Phase 240V, 220V,

Figure 25. Voltage Selector Switch 240/139V Three Phaseor 208V Position

3 Phase, 240V, 220V, or 208 Volt

This setting can provide 3-phase power at 240, 220, or 208 volts. After hooking up the hard wires to the lugs as shown in Figure 26, 240 volts can be obtained with the voltage regulator knob turned toward maximum; 220 volts can be obtained with the voltage regulator knob is turned down; and 208 volts can be obtained with the voltage regulator knob is at the lowest setting.

Single Phase: 139V, 127V, or 120V

This setting can provide single phase power at 139, 127, or 120 volts. After hooking up the hard wires to the lugs as shown in Figure 28, 139 volts can be obtained with the volt- age regulator knob turned toward maximum; 127 volts can be obtained with the voltage regulator knob is turned down; and 120 volts can be obtained with the voltage regulator knob is at the lowest setting.

Figure 26. Hard Wire Hookup for Three Phase 240V, 220V, or

Figure 28. Hard Wire Hookup for Single Phase 139V, 127V,

208V

or 120V

PAGE 38 — DCA-40SSAI — PARTS AND OPERATION MANUAL — FINAL COPY (07/09/01)

Page 37 Page 39
Page 38
Image 38
Multiquip DCA-40SSAI Single Phase 240V, 220V, or 208 Volt, Phase, 240V, 220V, or 208 Volt, Single Phase 139V, 127V, or
Page 37 Page 39
Top Page Image Contents