Multiquip DCA-40SSAI operation manual Voltage Selector Switch- Single Phase 240/120V Position

DCA-40SSAI — OUTPUT VOLTAGE SETUP

Voltage Selector Switch- Single Phase 240/120V Position

The following are additional voltages available when the volt- age selector switch is in the ‘single phase 240/120V’ posi- tion.

Single Phase: 120 Volt

This setting can provide single phase power at 120 volts. After hooking up the hard wires to the lugs as shown in Figure 31, 120 volts can be obtained with the voltage regula- tor knob turned to fine tune.

Figure 31. Hard Wire Hookup for Single Phase, 120 volt

Figure 29. Voltage Selector Switch 240/120V Single Phase

Position

Single Phase, 240 Volt

This setting can provide single phase power at 240 volts. After hooking up the hard wires to the lugs as shown in Figure 30, 240 volts can be obtained with the voltage regula- tor knob turned to fine tune.

Figure 30. Hard Wire Hookup for Single Phase 240 volt

DCA-40SSAI — PARTS AND OPERATION MANUAL — FINAL COPY (07/09/01) — PAGE 39