15
essentials
To charge from your computer:
You can also charge your phone’s battery by
connecting a cable from your phone’s micro USB port
to a high-power USB connector on a computer (not a
low-power one, such as the USB connector on your
keyboard or bus-powered USB hub). Typically, USB
high-power connectors are located directly on your
computer.
Both your phone and your computer must be turned
on, and you must have correct software drivers
installed on your computer. Cables and software
drivers are available in Motorola Original
TM
data kits,
sold separately.
turn it on & off
To turn on your phone
, press
and hold the Power/End Key(
%
)
until the display turns on.
The phone may require several seconds to turn on.
Ifprompt ed, use the keypad to enter your four-digit
unlock code (which, by default, is the last four digits of
your phone number) and press the Center Select
Key(
M
)(
OK
) to unlock thepho ne.
To turn off your phone
, press and hold the
Power/End Key(
%
).
make a call
Note:
For instructions on making Push to Talk calls,
see page68.
Enter a phone number, Area Code first, if applicable,
and press the Send Key(
$
) to make a call.
To make a call outside the U.S.A.
, press and hold
*
until you see
+
. Next, press the number keys to dial
the
country code
and
phone number
, and then
press the Send Key(
$
).