Motorola V750 manual Turn it on & off, Make a call, To charge from your computer

To charge from your computer:

You can also charge your phone’s battery by connecting a cable from your phone’s micro USB port to a high-power USB connector on a computer (not a low-power one, such as the USB connector on your keyboard or bus-powered USB hub). Typically, USB high-power connectors are located directly on your computer.

Both your phone and your computer must be turned on, and you must have correct software drivers installed on your computer. Cables and software drivers are available in Motorola OriginalTM data kits, sold separately.

turn it on & off

To turn on your phone, press

and hold the Power/End Key (%)

until the display turns on.

The phone may require several seconds to turn on. If prompted, use the keypad to enter your four-digit unlock code (which, by default, is the last four digits of your phone number) and press the Center Select Key (M) (OK) to unlock the phone.

To turn off your phone, press and hold the

Power/End Key (%).

make a call

Note: For instructions on making Push to Talk calls, see page 68.

Enter a phone number, Area Code first, if applicable, and press the Send Key ($) to make a call.

To make a call outside the U.S.A., press and hold * until you see +. Next, press the number keys to dial the country code and phone number, and then press the Send Key ($).

essentials 15