Motorola VE20 manual Entering Text, Selecting a Text Input Mode

ForSpeedDiallocations10-99(Two-TouchDialing):

1.Press the first digit.

2.Press and hold the second digit for approximately two seconds. The display screen confirms that the number has been dialed when it shows “Connecting...”.

Note	Speed dialing is not available when you are roaming;
	when you are roaming off the Sprint National
	Network, you must always dial using 11 digits
	(1 + area code + number).

Entering Text

Selecting a Text Input Mode

Your phone provides convenient ways to enter words, letters, punctuation, and numbers whenever you are prompted to enter text (for example, when adding a Contacts entry or when using Sprint Mail or SMS Text Messaging).

1.From a screen where you can enter text, press the right softkey to change the text input mode.

2.Select one of the following options:

PredictEnglish to enter text using a predictive text entering system that reduces number of keypresses required while entering a word. (See page 30.)

Multi-Tapto cycle through the alpha characters associated with the numbers on the keypad. (See page 31.)

Numbers to enter numbers by pressing the numbers on the keypad. (See page 32.)

Symbols to enter symbols. (See page 32.)

PredictSpanish to enter Spanish text using predictive text in the same way as Predict English. (See page 40.)

InsertPresetMsgs to enter preprogrammed messages. (See page 41.)

Recent Messages to insert a recent message.

Tip	When entering text, press * to change letter
	capitalization (ABC > Abc > abc).

Phone Basics

Section 2A. Phone Basics 29