Motorola VE 240 manual TTY operation, Set TTY mode, Find it s u Settings Call, Voice, Option

TTY operation

You can use an optional TTY device with your

phone to send and receive calls. You must plug the TTY device into the phone’s headset jack and set the phone to operate in one of three TTY modes.

Use a TSB-121 compliant cable (provided by the TTY device manufacturer) to connect the TTY device to the phone.

Set the phone volume to level 4 (middle setting) for proper operation. If you experience a high number of incorrect characters, adjust the volume as needed to minimize errors.

For optimal performance, your phone should be at least 12 inches (30 centimeters) from the TTY device. Placing the phone too close to the device may cause high error rates.

set TTY mode

ùWhen you set your phone to a TTY mode, it operates in that mode whenever the TTY device is connected.

Find it: s> u Settings > Call

1Scroll to TTY Setup and press s.

2Scroll to one of the following TTY Setup options and press s.

option

Voice	Set to standard voice mode.
TTY	Transmit and receive TTY characters.
VCO	Receive TTY characters but transmit
	by speaking into phone microphone.
HCO	Transmit TTY characters but receive by
	listening to phone earpiece.

28basics