Motorola W216, W231, W388 Tools and Test Equipment

W230/W388/W216/W231

15 May 30, 2008

The telephone displays a battery charge indicator icon in the idle screen to indicate the battery

charge level. The gauge shows four levels: 50%, 20%, 5%, and Low Battery.

Removing the battery causes the phone to shut down immediately and loose any pending work

(partially entered phone book entries or outgoing messages, for example).

Note: All batteries can cause property damage and/or bodily injury such as burns if a

conductive material such as jewelry, keys, or beaded chains touches exposed terminals. The

conductive material may complete an electrical circuit (short circuit) and become quite hot.

Exercise care in handling any charged battery, particularly when placing it inside a pocket,

purse, or other container with metal objects.

If the battery is removed while receiving a message, the message is lost.

To ensure proper memory retention, turn the phone OFF before removing the

battery.Immediately replace the old battery with a fresh battery.

For detailed operating instructions, refer to the appropriate User Guide.

Tools and Test Equipment

The table below lists the tools and test equipment used on W230/W388/W216/W231

telephones. Use either the listed items or the equivalent.

1. To order in North America, contact Motorola Aftermarket and Accessories Division (AAD) by phone at (800) 422-4210 or

FAX (800) 622-6210. Internationally, AAD can be reached by calling (847) 538-8023 or by fax (847) 576-3023.

2. Not available from Motorola. To order, contact Hewlett Packard at (800) 452-4844.

Table 1: General Test Equipment and Tools

Motorola Part Number1Description Application

See Table 3 Charger Used to charge battery and power phone

0180386A82 Antistatic Mat Kit (includes 66-80387A95

antistatic mat, 66-80334B36 ground

cord, and 42-80385A59 wrist band)

Provides protection from damage to

phone caused by electrostatic discharge

(ESD)

- Antistatic Gloves Provides protection from damage to

phone caused by electrostatic discharge

(ESD)

0-00-00-3005 (AMS) Disassembly tool, plastic with flat and

pointed ends (manual opening tool)

Used during assembly/disassembly

0-00-00-40861 (AMS) Camera disassembly Jig tool

6680388B01 Tweezers, plastic Used during assembly/disassembly

- T5 Screw driver Used with Screw Driver

HP34401A2Digital Multimeter Used to measure battery voltage