W230/W388/W216/W231
Removing the board to board connector
1.Removing the board to board connector.
Figure 21.
Removing and Replacing the LCD Screen
1.Remove the antenna module as described earlier.
2.Gently pry the LCD screen away from the Transceiver board. Six hooks hold it in place (three on each side).
Figure 22. Pry the LCD screen away from the Transceiver board
3.Detach the cable connecting the LCD screen to the Transceiver board.
4.To replace it, gently solder the cable to the Transceiver board then mount the LCD.
5.Restore the antenna module and other parts.
25 | May 30, 2008 |
