Mesh Enabled Architecture WMC6300 Windows Users Guide
Installing the WMC6300 Wireless Modem CardATTENTION
After installing the MEA software, MeshTray must be active when installing the WMC6300 card.
Connect the Antenna Assembly
Complete the following procedure to connect the Antenna Assembly (Knuckle or Pigtail type) to
the WMC6300 for use in a standard laptop computer.
ATTENTION
Always eject card when not in use.
Locate the Antenna and insert the connector into the WMC6300 antenna port as shown in
Figure 26.
NOTE: The connector will snap into place when fully inserted.
Figure 26. Attach the Antenna to the WMC6300
ATTENTION
Use only FCC approved antennas.
Use of another antenna is prohibited and violates FCC regulations.
Never use the WMC6300 with the Antenna disconnected from the Card.
19