Mesh Enabled Architecture WMC6300 Windows Users Guide If your WMC6300 has been licensed to display routing information, an optional tab will be
displayed in MeshTray as shown in Figure 63.
Figure 63. MeshTray Routing Tab
Routing Table
The Routing Table displays the MAC address for the Destination node and the node to be
utilized for the Next Hop, the number of Hops to the Destination node and the current State of
the link quality to the Destination node.
Neighbor Table
The Neighbor Table displays the MAC address and the Signal Level for the adjacent nodes that
the WMC6300 may route through, depending on the desired end node.
The Last Rate column displays the last data rate used to transmit user data to the neighbor
destination. If no user data has been sent to the neighbor destination, a data rate of 1.5 is
displayed by default.
Threshold
Adjusting the threshold control allows the user to view neighbors that have a signal level greater
than or equal to the selected threshold level.
51