Motorola XTNID manual Programming Features Cloning Radios, Cloning with a Multi-Unit Charger MUC

PROGRAMMING FEATURES

CLONING RADIOS

You can copy XTNi™ Series radio profiles from one Source radio to a Target radio by using:

1.One Multi Unit Charger (optional accessory)

2.Two single unit chargers and a Radio-to- Radio cloning cable (optional accessory)

3.the CPS

Cloning with a Multi-Unit Charger (MUC)

To clone radios using the MUC, there must be at least two radios:

•a Source radio(radio to be cloned) and

•a Target radio (radio to which the configuration of the “source radio” will be copied or cloned)

The Source radio has to be in Pocket 1, 3 or 5 while the Target radio to be cloned has to be in Pockets 2, 4 or 6, matching the MUC’s pockets by pairs as follows: 1 and 2 or 3 and 4 or 5 and 6.

When cloning, the MUC does not need to be plugged into a power source, but ALL radios require charged batteries.

Follow cloning instructions explained in pages 51-52 from step 4 through step 8 (take into account that when instructions refer to “SUC”, this is equivalent in the MUC instructions to “pocket”.

Further details on how to clone units are explained in the instructions sheet provided with the MUC.

To order the MUC, see “Chargers” on page 65 for the MUC part number.

English 50