Motorola XTNID manual Does not come on

Symptom	Try this
	Confirm radios have the same Channel, Frequency, Interference
	Eliminator Code and Scramble Code settings. Recharge, replace
Message not transmitted/	and/or reposition batteries. Refer to ""About the Li-Ion Battery" on
	page 12. Obstructions and operating indoors, or in vehicles, may
received	interfere: change location. Refer to "Talking and Monitoring" on
	page 27. Verify that the radio is not in Scan mode. Refer to
	"Programming Scan List" on page 44 and "Nuisance Channel
	Delete" on page 47.
	Radios are too close, they must be at least five feet apart. Radios
Heavy static or interference	are too far apart or obstacles are interfering with transmission.
	Refer to "Talking and Monitoring" on page 27.
	Recharge or replace Li-Ion battery. Replace AA batteries. Extreme
Low batteries	operating temperatures affect battery life. Refer to "About the Li-Ion
	Battery" on page 12.
	Check radio/battery is properly inserted and check battery/charger
Drop-in Charger LED light	contacts to be sure they are clean and charging pin is inserted
	correctly. Refer to "Charging the Battery" on page 19, "Drop-in Tray
does not come on
	Charger LED Indicators" on page 23 and "Installing the Lithium-Ion
	(Li-Ion) Battery" on page 14.
Low battery LED blinking	Verify that the radio is set to the correct battery type. Refer to
	"Installing the Lithium-Ion (Li-Ion) Battery" on page 14, "Installing
although new batteries are
	Alkaline Battery" on page 15 and "About the Li-Ion Battery" on page
installed
	12.

TROUBLESHOOTING

55English