Housing
DIN Rail
For many industrial applications, you will find it convenient to use the DIN Rail attachments, as shown below.
STEP 1: Use 2 screws per ear to attach DIN Rail mounts to each of NPort Express’s two ears.
⇒
STEP 2: Insert the top of the DIN Rail into slot A of the DIN Rail mount.
STEP 3: Push the bottom of NPort Express so that the bottom of the DIN Rail snaps into slot B of the DIN Rail mount.
NOTE: The Din Rail mounting kit is an optional accessory.
To remove NPort Express from the DIN Rail, simply reverse Steps 2 and 3 above by grasping the bottom of the NPort Express unit with both hands, and then using your fingers to pull down slightly on the DIN Rail mounts at slot B. This releases the bottom of the DIN Rail from the DIN Rail mount.
