Wall Mount
For many industrial applications, you will find it convenient to mount NPort Express on the wall, using two screws, as indicated below.
STEP 1: Screw two screws, separated by 7.8 cm, into the wall. The heads of the screws should be no greater than 6.5 mm in diameter, and the shafts should be no greater than 3 mm in diameter. Do not screw the screws in all the
STEP 2: Insert the two screw heads through the large parts of the keyhole shaped apertures, and then slide NPort Express downwards, as indicated.
STEP 3: For added stability, simply tighten the two screws.
To remove NPort Express from the wall mount, simply reverse Steps 2 and 3.
