MSI ms-6382 manual DDR Module Combination, Installing DDR Modules

Hardware Setup

DDR Module Combination

You can install either single sided or double sided 184-pin DDR DIMM modules into DDR DIMM slots to meet your needs. Different from the SDR DIMM, the DDR DIMM has only one notch on the center of module. The number of pins on either side of the breaks are different. The module will only fit in the right orientation.

You can install memory modules in any combination as follows:

Slot	Memory Module	Total Memory
Slot 1	64MB, 128MB,	64MB~1GB
(Bank 0 & Bank 1)	256MB, 512MB, 1GB
Slot 2	64MB, 128MB,	64MB~1GB
(Bank 2 & Bank 3)	256MB, 512MB, 1GB
Maximum System Memory Supported		64MB~2GB

Installing DDR Modules

1.The DDR DIMM has only one notch on the center of module. The module will only fit in the right orientation.

2.Insert the DIMM memory module vertically into the DIMM slot. Then push it in.

Volt notch

3.The plastic clip at each side of the DIMM slot will automatically close.

2-5