Chapter 3

Midi Port Address

The field specifies the base I/O port address for the onboard Midi Port. Available settings: Disabled, 330, 300, 290.

Midi Port IRQThis will determine which IRQ the midi port will use. Settings: 5, 10.Init Display First

This item specifies which VGA card is your primary graphics adapter. Settings: PCI Slot and AGP.

OnChip USB Controller

Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have USB peripherals. Settings: All Enabled, All Disabled, 1 USB Port, 2 USB Port.

USBKeyboard/MouseSupport

Set to Enabled if you need to use a USB keyboard/mouse in the operating system that does not support or have any USB driver installed, such as DOS and SCO Unix. Settings: Enabled, Disabled.

IDEHDDBlockMode

Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your hard drive supports block mode (most new drives do), select Enabled for automatic detection of the optimal number of block read/writes per sector the drive can support. Settings: Enabled, Disabled.

PWRON After PWR-Fail

This item specifies whether your system will reboot after a power failure or interrupt occurs. Available settings are:

Off

Leaves the computer in the power off state.

On

Reboots the computer.

Former-Sts Restores the system to the status before power failure or interrupt occurred.

3-20