Hardware Setup

Fan Power Connectors: CFAN1/SFAN1

The CFAN1 (processor fan) and SFAN1 (system fan) support system cooling fan with +12V. It supports three-pin head connector. When connect- ing the wire to the connectors, always take note that the red wire is the positive and should be connected to the +12V, the black wire is Ground and should be connected to GND. If the mainboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control.

SENSOR +12V GND

CFAN1

SENSOR +12V GND

SFAN1

Note:

1.Always consult the vendor for proper CPU cooling fan.

2.CPU Fan supports the fan control. You can install the PC Alert utility that will automatically control the CPU Fan speed accord- ing to the actual CPU temperature.

2-15

Page 27
Image 27
MSI ms-6382 manual Fan Power Connectors CFAN1/SFAN1