Hardware Setup
Power Saving Switch Connector: JGS1
Attach a power saving switch to this connector. Pressing the switch once will have the system enter the sleep/suspend state. Press any key to wake up the system.
JGS1
IrDA Infrared Module Header: FPIR
This connector allows you to connect to IrDA Infrared modules and is compliant with Intel® Front Panel I/O Connectivity Design Guide. You must configure the setting through the BIOS setup to use the IR function.
FPIR Pin Definition
Pin | Signal |
1 | NC |
2 | NC |
3 | VCC5 |
4 | GND |
5 | IRTX |
6 | IRRX |
1 | 2 |
5 | 6 |
FPIR