MSI MS-9297 manual Precautions

▍Preface

Precautions

1)Access can only be gained by service persons or by users who have been trained on the restrictions and the precautions for this specific site.

2)Access is by means of at least one of the following, special tool, lock and key, or other means of security, and is controlled by the authority responsible for the location.

3)Rack Mount Installation Instructions:

◙Elevated Operating Ambient - If installed in a closed or multi-unit rack as- sembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maxi- mum ambient temperature (Tma) specified by the manufacturer.

◙Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised.

◙Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechani- cal loading.

◙Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropri- ate consideration of equipment nameplate ratings should be used when addressing this concern.

◙Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connec- tions other than direct connections to the branch circuit (e.g. use of power strips).

iv