English | Operating Manual for Wood Splitter |
Before detecting leaks, put on goggles and protective gloves and then move a piece of cardboard or wood over the suspected area and ascertain whether the cardboard or wood has changed colour. If escaping liquid causes injury, immediately cause a doctor. Serious inflammation or reactions may occur if medical treatment is not implemented immediately. To ensure a secure footing / safe working environment, always keep the work area and the area around the unit free of objects. Ensure that all statutory regulations are observed.
Symbols on the unit
Various symbols are stuck on the unit. Below is an explanation of the symbols:
Attention!
! Before switching on the unit, read the operating instructions.
Keep third parties out of the danger area.
Graphical representations
The graphical representations may deviate slightly in detail from the purchased unit.
Assembling the unit
Attention!
When unpacking this unit, exercise extreme caution. Some components are very heavy and several persons or a hoist are required.
Attaching the wheels
Fig. 1
Jack up the tank module by approx.
Before carrying out any work on the unit
Protect yourself from injury. Before carrying out any work on this unit:
–Switch off the engine,
–Wait until all moving parts have come to a standstill; leave the engine to cool down,
–Remove
–Before repairing, adjusting or checking hoses, hose connections, pipelines or other components, depressurise the hydraulics.
After operating the unit
Before leaving the unit, switch off the engine and remove the spark- plug terminal. Leave the engine to cool down before putting the unit away or in storage.
MAX. 16%
Keep hands and other body parts from leaking hydraulic lines.
Never place hands or feet between splitting wedge and wood or near moving parts.
Wear eye and ear protection.
Wear protective gloves.
Working on steep slopes may be dangerous.
transportation caps from the outsides of the wheels. Remove cotter pin, hexagon castellated nut and washer from each axle.
2 | 3 | 4 |
1 |
|
|
11 |
| 5 |
| 6 | |
|
| |
|
| 7 |
10 | 9 8 |
|
|
| Fig.1 |
1 | Bolts |
2 | Mudguard (optional) |
3 | Lock washer |
Safety devices
Safety devices, e.g. controls and protective devices and guards, are for your protection and must always be functional.
Never modify safety devices or bypass their function.
Before carrying out any work on the unit: follow instructions in the operating manual.
Always keep these symbols on the unit in a legible state.
Symbols in this manual
The following symbol is used in this manual:
Caution Danger These symbols refer to dangers associated with the described activity which may cause injury and/or damage.
4 | Hexagon nut |
5 | Hydraulic tank |
6 | Washer |
7 | Wheel |
8 | Castellated nut |
9 | Cotter pin |
10 | Cap |
11 | Washer |
Note: Before attaching the wheels, it is recommended to polish the axles with emery cloth.
•Place the wheels, with the tyre valve on the outside, onto the respective axle ends.
Push on the washer and secure with a castellated nut.
2