PAINTING

Carefully remove the spring clip on the back of the grill logo and remove the logo. Mask the baffle area of the speaker cabinet out to the grill mounting groove. If you are going to mount the MP41 using the supplied wall bracket it is best to also mask off the foam rubber bracket gaskets at the top and bottom of the speaker cabinet. Almost any type of paint can be used but best results will be had using a quick drying enamel or lacquer spray paint. For best results always follow the paint manufacturers recommendations for proper application. After painting the cabinet, grill and applicable end caps allow the paint to dry thoroughly.

GRILL ASSEMBLY

Place the four grill adhesive strips in the groove located at the outer rim of the baffle. Carefully snap the grill into place and rotate the logo for proper orientation.

MP41 CONFIGURATION GUIDE

FLOOR STAND

Remove the B-Type end caps, brass thumb screws, and aluminum mounting bracket. Replace the brass thumb screws in the top of the cabinet and snap an A-Type end cap into place. Then simply mount the MP52 to the recommended Studio Tech S1 stands using a 1/4-20 1” long hex head bolt. (Not Included)

A-TYPE

CAP

STUDIO TECH

S1 STANDS

RECOMMENDED

BRASS

THUMB

SCREW

9

6

Page 7
Image 7
MTX Audio MP41W, MP41B owner manual Painting, Grill Assembly, Floor Stand

MP41W, MP41B specifications

MTX Audio is renowned for producing high-quality audio equipment, and their MP41W and MP41B speakers exemplify this commitment to excellence. Designed specifically for marine use, both models offer robust sound performance while being built to withstand the rigors of water environments.

The MTX Audio MP41W is the white variant, while the MP41B comes in a sleek black finish. Both models feature a 4-inch full-range speaker that delivers impressive sound clarity and volume, making them ideal for outdoor adventures on boats, jet skis, or even ATV riding. The speakers boast a peak power handling of up to 150 watts, providing enough strength to fill open spaces with rich audio.

One of the standout characteristics of the MP41W and MP41B is their weather-resistant design. They are constructed with a durable polypropylene cone that is not only lightweight but also provides excellent sound without the risk of damage from moisture. Additionally, the speakers are equipped with a UV-resistant coating that safeguards them against sun damage, ensuring long-lasting durability even in harsh marine environments.

In terms of technology, these speakers incorporate a powerful neodymium magnet system, which enhances the overall performance by improving efficiency and sound output. This means that, even at higher volumes, audio distortion is minimized, resulting in clear and engaging sound quality. The speakers are also equipped with a 20mm tweeter that contributes to a full-range sound, providing both depth and clarity across various music genres.

Installation is another critical aspect where the MP41W and MP41B stand out. They come with a simple mounting system that allows for easy integration into various aquatic settings, whether it be on a boat or sports vehicle. The speakers are compatible with most marine audio systems, adding versatility for users looking to upgrade their sound experience.

Additionally, these models feature a 4-ohm impedance, which is compatible with a wide range of amplifiers, further enhancing their usability. The sleek design of both the MP41W and MP41B allows them to blend seamlessly into any aesthetic, making them not just functional but also stylish additions to any marine setup.

In conclusion, the MTX Audio MP41W and MP41B speakers are excellent choices for anyone looking to elevate their audio experience in marine environments. Their blend of weather resistance, powerful sound capabilities, and user-friendly installation makes them stand out in the competitive speaker market. Whether you're throwing a party on your boat or just enjoying some music while fishing, these speakers are sure to deliver impressive performance.