Appendix B – Product Approvals, Regulatory Design Considerations, Compliance

8.No repairs are to be made by you. Repairs are to be made only by Multi-Tech Systems or its licensees. Unauthorized repairs void registration and warranty.

9.If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment.

If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

10.Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information.

11.This equipment is hearing aid compatible.

12.Manufacturing Information:

Manufacturer: Multi-Tech Systems, Inc.

Trade Name

SocketModem

Model Number:

MT2456SMI-22

Registration No:

US: AU7MD04B2456

Ringer Equivalence:

0.4B

Modular Jack (USOC):

RJ11C or RJ11W (single line)

Service Center in USA:

Multi-Tech Systems, Inc.

 

2205 Woodale Drive

 

Mounds View, MN 55112

 

U.S.A.

 

(763) 785-3500

 

(763) 785-9874 Fax

Label Content and Format

Approved terminal equipment and approved protective circuitry shall prominently display the following information using the format shown below:

￿Responsible party

￿Product Identification

￿Equipment Code

￿Ringer Equivalence

￿Ringer Type

￿Indication that the product meets the requirements of 47 CFR Part 68

The information required by the first five items shall correspond to the records in the ACTA database of approved equipment. The required information shall be encoded in the following format:

US: AAAEQ##TXXX

Where:

US: Is a fixed field that indicates the equipment meets all requirements of 47 CFR Part 68 (including the requirements published by ACTA).

AAAis the responsible party’s Grantee Code obtained previously from the FCC’s Common Carrier Bureau or currently from ACTA.

EQ Is an Equipment Code indicating to the Service Provider any special signal handling or billing requirements. The Equipment codes are listed in Annex A (normative).

##Is the Ringer Equivalence Number without a decimal point (e.g. REN of 1.0 = 10, REN of 0.3 = 03). In the case of a “Z” ringer, ZZ shall appear. In the case of approved equipment without a network interface and equipment not connecting to circuits with analog ringing supplied then “NA” shall appear.

T is the ringer type letter associated with the Ringer Equivalence Number, in accordance with the technical requirements. In the case of approved equipment without a network interface and equipment not connecting to circuits with analog ringing supplied, the letter “N” shall appear.

XXXIs a product identifier, unique when combined with the responsible party’s Grantee Code, of at least one and up to nine alphanumeric characters (including one or more dashes (-) if desired. A dash shall not appear as the first or last character nor shall the identifier consist entirely of dashes). The responsible party shall define this identifier.

Label Physical Characteristics

The information required above shall be permanently affixed and legible without magnification. It may be etched, engraved, stamped, indelibly printed or otherwise permanently marked. Alternatively, the required information may be permanently marked on a nameplate of metal, plastic or other material fastened to the enclosure by welding, riveting or with a permanent adhesive. Such a nameplate shall be able to last for the expected lifetime of the equipment and shall not be readily detachable.

Multi-Tech Systems, Inc. MT2456SMI-22 SocketModem Developer’s Guide

53

Page 53
Image 53
Multi-Tech Systems MT2456SMI22 manual Label Content and Format, Label Physical Characteristics