Multi-Tech Systems MT2834BA Series What Is in Your Modem Package?, Installation, Safety Warnings

Chapter 2 - Installation and Connection

2.1What Is in Your Modem Package?

Your MultiModem is made up of many components. Make sure you have them all before trying to operate your modem. Your package should include:

·MT2834BA or MT2834BL data/fax modem

·RJ-11 telephone cord or BS-6312 plug (UK models)

·AC Power Transformer

·One Quick Start Guide

·One MT2834BA/BL CD. This CD contains PhoneToolsTM ( a data communications and fax software program), the User Guide, and Adobe Acrobat Reader.

If any item is missing, contact Tech Support.

2.2Installation

The installation of the modem consists of making the physical connections necessary to render the modem functional with your computer.

2.2.1Safety Warnings

1.Use this product only with UL and cUL listed computers.

2.To reduce the risk of fire, use only 26 AWG (.41mm) or larger telephone wiring.

3.Never install telephone wiring during a lightning storm.

4.Never install a telephone jack in wet locations unless the jack is specifically designed for wet locations.

5.Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

6.Use caution when installing or modifying telephone lines.

7.Avoid using a telephone during an electrical storm. There is a risk of electrical shock from lightning.

8.Do not use a telephone in the vicinity of a gas leak.

2.2.2Installation Procedure

The following procedures will guide you through the physical connections required to make your modem operational. Software loading is covered later in this guide.

1.Verify that the settings for DIP-Switch #5 and DIP-Switch #10 match those of your system configuration.

The 16-position DIP-Switch (numbered 1-16) is accessible through a cut-out on the right side (as the LEDs are facing you) of the modem chassis. For a full description of all DIP-Switch Settings, refer to Chapter 7.

DIP-Switch	Condition	Effect
#5	UP*	Selects Answer mode
	DOWN	Selects Originate mode
#10	UP*	Selects Dial-Up operation
	DOWN	Selects Lease Line operation

* Factory Default setting

Multi-Tech Systems, Inc. MT2834BA/BL Series User Guide 14