Multi-Tech Systems MT2834BL Series, MT2834BA Series manual Summary of AT Commands, Functional Modes

Chapter 5 - Command Mode

COMMAND +++AT

MODE

HANG			Dial (D or A) command,
UP			or incoming phone call
		WAIT FOR
		CARRIER
	No carrier
			Carrier detected
	detected

Carrier lost

ON-LINE	AT0 Command
MODE

Figure 5-1. Functional Modes

5.2Summary of AT Commands

A wide variety of autodial operations and modem options can be controlled when the modem is in Command Mode. Remember, nearly all commands begin with AT.

These commands are organized into several functional groups. An alphabetical summary of commands is provided in Appendix D.

HOW TO	COMMANDS
DIAL	D	Dial
	A: or : Continuous Redial
	$D	DTR Dialing
	$VD	Voice/Data Dialing
	N	Dial a Stored Number
MODIFY DIALING	P/T	Pulse/Tone Dialing
PROCEDURES	&P	Set Pulse Dial Ratios
	,	Automatic Pauses in dialing
	Y	Long Space Disconnect
	W	Wait for New Dial Tone
	;	Return to Command Mode After Dial
		Command
	R	Reverse Mode of Operation
	!	Flash On Hook
	$	AT&T "Calling Card" Tones
	@	Quiet Answer
MEMORIZE PHONE
NUMBERS	D...N	Store Phone Numbers
	NN	Number Linking
	L	List Numbers Stored in Memory

Multi-Tech Systems, Inc. MT2834BA/BL Series User Guide 29