Multi-Tech Systems MT5634ZBA-V-V92 manual

Appendix D – Waste Electrical and Electronic Equipment

Appendix D – Waste Electrical and Electronic Equipment

WEEE (Waste Electrical and Electronic Equipment) Statement

July, 2005

The WEEE directive places an obligation on EU-based manufacturers, distributors, and retailers to take-back electronics products at the end of their useful life. A sister Directive, ROHS (Restriction of Hazardous Substances) complements the WEEE Directive by banning the presence of specific hazardous substances in the products at the design phase. The WEEE Directive covers all Multi-Tech products imported into the EU as of August 13, 2005. EU-based manufacturers, distributors, retailers and importers are obliged to finance the costs of recovery from municipal collection points, reuse, and recycling of specified percentages per the WEEE requirements.

Instructions for Disposal of WEEE by Users in the European Union

The symbol shown below is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, it is the user’s responsibility to dispose of their waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the seller from whom you purchased the product.

Multi-Tech Systems, Inc. MT5634ZBA-Series User Guide (S000286G)

35

Image 35

Multi-Tech Systems MT5634ZBA-V-V92 manual Appendix D Waste Electrical and Electronic Equipment

Contents

MultiModem ZBA MultiModem ZBA MT5634ZBA-Series User Guide Table of Contents Table of Contents Introduction Features Table Features Specific to Opening the Modem InstallationSafety Warnings Change the Internal Jumpers Changing the Voice Jumper Non-Global Connection Connect the Modem to Your PCGlobal Connections Connect the Modem to Your PC Connect the Two-Wire Leased Line Leased Line OnlyConnect the Modem to the AC Power Outlet Power-On Test Installing the Modem Driver Install the Modem Driver Using AT Commands to Configure Your Modem Using the Global Wizard to Configure Your Modem Modem Serial Speed Guidelines Configure the modem for best performance About the Front Panel Operation Operation SetupLeased-Line Operation Connecting to the Internet AT Commands, S- Registers, and Result Codes Changing the Setup Password Remote ConfigurationBasic Procedure Setup Turning Callback Security On and Off Changing the Setup PasswordCallback Security Password-Only Callback Setting Callback Security Message ParityAssigning Callback Passwords and Phone Numbers Calling Procedures Extension-Entry Callback Number-Entry Callback Direct Connection Callback Security Commands Callback Assignments Form Modem Does Not Respond to Commands TroubleshootingNone of the Indicators Light Lack of a physical connection to the telephone line Page Fax and Data Software Can’t Run at the Same Time Data Is Being LostThere Are Garbage Characters on the Monitor Modem Doesn’t Work with Caller ID Fax Data Rates Appendix a Technical Specifications Receiver Sensitivity Identify the Current Firmware Version Upgrade OverviewAppendix B Upgrading the Modem’s Firmware Identify the Modem Firmware Restore Your Parameters Download the Upgrade FileExtract the Upgrade Files Upgrade the Modem’s Firmware FCC Part 68 Telecom Appendix C Regulatory ComplianceFCC Part 15 Regulation International Modem Restrictions EMC, Safety and R&TTE Directive ComplianceCanadian Limitations Notice Industry Canada South African Statement New Zealand Telecom Warning Notice Weee Waste Electrical and Electronic Equipment Statement Appendix D Waste Electrical and Electronic Equipment Setup Appendix E Installing a Modem under Linux Connecting to a Cisco Router Console Port Appendix F Connecting to a Cisco Router Console Port Connections Remote Configuration Multi-Tech Warranty Statement Appendix G Warranty, Service, and Technical Support Repair Procedures for International Distributors Appendix H Rohs HT/TS Substance Concentration Index AT commands Speed