CA4HCTROWEL — OPERATION - OPTIONS
Pitching The Blades - Standard Handle
Adjust the blade pitch on the Standard handle, (Figure
26)by turn the Pitch Adjust Wheel clockwise or counter- clockwise.
PITCH ADJUST
WHEEL
Figure 26. Standard Pitch Adjust
Pitching The Blades - Quick Pitch Handle
1.To pitch the blades upwards using the "Quick Pitch™" handle, (Figure 27) simply squeeze the trigger lock and pull the handle towards the operator. Pushing the handle towards the engine will cause the blades to lay flat.
21
4
3
1Quick Pitch Handle
2Blade Pitch Trigger Lock
3Increase Blade Pitch
4Decrease Blade Pitch
(Compresses spring inside handle tube)
Figure 27. Quick Pitch™ Handle
Blades
| Blades should be changed when | |
NOTE | they fail to finish concrete in a | |
satisfactory manner. | ||
|
Bladesareavitalpartoffinishingconcrete.This finisherhasbeen designedtofinishconcreteandisbuilttostringentqualitystandards out of the finest trowel steel. If you need replacement blades, consult your parts list in this manual for part numbers and order them from your Multiquip parts dealer or importer.
Combo Blades
This trowel was equipped with combination type (Figure 28) blades as original equipment.These blades have been designed for optimum performance in both the floating and finishing of concrete.Thesebladesareversatileandshouldtakecareofmost troweling needs.
Figure 28. Combination Blade
Optional Float Discs (Pans)
These round discs (Figure 29) attach to the spiders and allow the machineto“float”on“wet”concrete.Thediscdesignallowsearly floating and easy movement from wet to dry areas.They are also very effective in embedding large aggregates and surface hardeners.
Figure 29. Float Disk (Pan)
PAGE 26 — CA4HC