inspection

1.To check the engine fuel level, make sure the light tower is placed on secure level ground with the engine stopped.

2.Lift the light tower access door (Figure 7) opposite the control panel. Set the door support latch in place to keep the door open (up).

The 12-volt DC battery (Figure 8) is shipped dry and will require a proper electrolyte level for operation.

Figure 7. Adding Fuel

3. Remove the fuel cap from the fuel tank.

CAUTION

ALWAYS fill the fuel tank with clean, fresh #2 diesel fuel. DO NOT fill the fuel tank beyond its capacity. DO NOT TOP-OFF.

4.Pay attention to the fuel tank capacity when replenishing fuel.The fuel tank cap must be closed tightly after filling. Handle fuel in a safe container. If the container does not have a spout, use a funnel.

5.Wipe up any spilled fuel immediately!

Battery Check

WARNING

The operator must wear the appropriate protective equipment and clothing while handling the battery.

Failure to wear protective equipment or clothing could result in serious injury.

Figure 8. Battery

When servicing of the battery is required, perform the following:

„„A face shield and rubber gloves should be worn while handling and servicing the battery's electrolyte.

„„Disconnect battery terminal clamps, and remove the battery from the generator cabinet when servicing is required.

„„DO NOT overfill the battery.

WARNING

Electrolyte is an acid and must be handled with caution. ALWAYS follow servicing instructions from the electrolyte manufacturer to ensure safety. Serious

injury can result from careless handling and noncompliance to safety handling instructions.

Overfilling the battery may cause the electrolyte to overflow resulting in corrosion to nearby components. Immediately wash off any spilled electrolyte (battery acid).

WARNING

When connecting the positive (+) cable to the battery's positive (+) terminal post, DO NOT allow the wrench or any metallic part to come in contact with the battery's

negative (-) terminal post.This may result in an electrical short circuit or an explosion. Always connect positive

(+)end first then negative (-) end. Always disconnect (-) end first then positve (+) end.

NOTICE

Use only distilled water in the battery. Tap water can reduce the operating life of the battery.

LT12Dab LIGHT TOWER • operation manual — rev. #0 (06/03/11) — page 21

Page 20 Page 22
Page 21
Image 21
Multiquip LT12DAB operation manual Battery Check, Wipe up any spilled fuel immediately
Page 20 Page 22

LT12DAB specifications

The Multiquip LT12DAB is an innovative and reliable light tower designed to deliver efficient lighting solutions for various outdoor applications. Known for its robust construction and user-friendly features, the LT12DAB is ideal for construction sites, events, and emergency situations, providing flexibility and performance in a compact package.

One of the standout features of the LT12DAB is its powerful lighting system. It is equipped with four high-intensity LED lights, each delivering up to 12,000 lumens, ensuring ample illumination for expansive areas. The LED technology not only enhances visibility but also offers advantages in power consumption, resulting in reduced energy costs and longer operational life. The tower can be raised up to 30 feet, enabling it to cast a broad beam of light across large outdoor spaces.

The LT12DAB is built with advanced mobility in mind. It features a durable, weather-resistant frame that can withstand various environmental conditions, making it suitable for use in diverse locations. The all-terrain wheels provide enhanced maneuverability, allowing operators to transport the unit easily across job sites or uneven terrains. Additionally, the lightweight design ensures that it can be easily handled by a small crew.

Powering the LT12DAB is a reliable and fuel-efficient diesel generator that provides extended run times without frequent refueling. This generator not only supports the lighting system but can also power additional tools and equipment, adding versatility to its functionality. The unit is designed with low noise emissions, making it ideal for operation in noise-sensitive areas.

Ease of use is paramount in the design of the LT12DAB. The intuitive control panel allows users to operate the lights and generator effortlessly. The telescopic mast can be raised or lowered quickly, with safety features in place to prevent accidental collapse. Moreover, the integrated sensors monitor the oil levels and engine temperature, providing alerts for maintenance needs.

In summary, the Multiquip LT12DAB combines powerful lighting capabilities with robust construction and user-friendly features. Its mobility, energy efficiency, and reliability make it a valuable tool for any outdoor project, ensuring that worksites remain well-lit and safe, regardless of the conditions. Whether for construction, events, or emergencies, the LT12DAB stands out for its performance and adaptability, meeting the demands of today’s professional environments.
Top Page Image Contents