Safety Information

TRanSpORTIng SaFeTY

CauTIOn

„Before lifting, make sure that light tower parts are not damaged and screws are not loosened or lost.

„aLWaYS make sure crane or lifting device has been properly secured to lifting hook of the equipment.

„neveR lift the equipment while engine is running.

„Make sure the tower is in the stowed position before lifting.

STOWED

POSITION

REAR

MAST

LOCK

„aLWaYS Make sure rear mast lock is secure before lifting.

„Use adequate lifting cable (wire or rope) of suffi cient strength.

„Use one point suspension hook and lift straight upwards.

LIFTING BALE

LIGHT TOWER

FORKLIFT

POCKETS

„If lifting through pockets, make sure forks of forklift are inserted in pockets as far as possible before lifting.

„Never allow any person or animal to stand underneath the equipment while lifting.

„DO nOT lift equipment to unnecessary heights.

Loading and Tie-Down on Flatbed Truck

NOTICE

„Before loading light tower to fl atbed truck, disconnect all four fl oodlight connectors and tie-wrap the cables against the T-bar to prevent damage to the cables and connectors.

CABLE

TIE

CABLE

CONNECTORS

DISCONNECTED

„When loading onto fl atbed truck, make sure that front jackstand of light tower is retracted and in the horizontal position so that the foot does not make contact with the deck fl oor.

FRONT JACKSTAND

RETRACTED

TONGUE

TRANSPORT

 

 

TIE-DOWN

 

POINT (4)

SIDE

REAR

JACK

JACK

STAND (2)

STAND (2)

„Make sure that the two side (left and right) and two rear jackstands are in the vertical postion, slightly extended, so that each foot makes contact with the deck fl oor.

„Straps and chains should be routed through the transport tie-down points located beneath each corner of the cabinet to allow even application of forece to the front and rear of the machine.

„DO nOT secure the unit by running a strap or chain over the tongue of the light tower. This may cause severe damage to the unit.

page 8 — LT12Dab LIGHT TOWER • operation manual — rev. #0 (06/03/11)

Page 8
Image 8
Multiquip LT12DAB operation manual TRanSpORTIng SaFeTY, Loading and Tie-Down on Flatbed Truck

LT12DAB specifications

The Multiquip LT12DAB is an innovative and reliable light tower designed to deliver efficient lighting solutions for various outdoor applications. Known for its robust construction and user-friendly features, the LT12DAB is ideal for construction sites, events, and emergency situations, providing flexibility and performance in a compact package.

One of the standout features of the LT12DAB is its powerful lighting system. It is equipped with four high-intensity LED lights, each delivering up to 12,000 lumens, ensuring ample illumination for expansive areas. The LED technology not only enhances visibility but also offers advantages in power consumption, resulting in reduced energy costs and longer operational life. The tower can be raised up to 30 feet, enabling it to cast a broad beam of light across large outdoor spaces.

The LT12DAB is built with advanced mobility in mind. It features a durable, weather-resistant frame that can withstand various environmental conditions, making it suitable for use in diverse locations. The all-terrain wheels provide enhanced maneuverability, allowing operators to transport the unit easily across job sites or uneven terrains. Additionally, the lightweight design ensures that it can be easily handled by a small crew.

Powering the LT12DAB is a reliable and fuel-efficient diesel generator that provides extended run times without frequent refueling. This generator not only supports the lighting system but can also power additional tools and equipment, adding versatility to its functionality. The unit is designed with low noise emissions, making it ideal for operation in noise-sensitive areas.

Ease of use is paramount in the design of the LT12DAB. The intuitive control panel allows users to operate the lights and generator effortlessly. The telescopic mast can be raised or lowered quickly, with safety features in place to prevent accidental collapse. Moreover, the integrated sensors monitor the oil levels and engine temperature, providing alerts for maintenance needs.

In summary, the Multiquip LT12DAB combines powerful lighting capabilities with robust construction and user-friendly features. Its mobility, energy efficiency, and reliability make it a valuable tool for any outdoor project, ensuring that worksites remain well-lit and safe, regardless of the conditions. Whether for construction, events, or emergencies, the LT12DAB stands out for its performance and adaptability, meeting the demands of today’s professional environments.