TROUBLESHOOTING

 

 

 

 

 

 

 

Table 10. Lamp Troubleshooting

 

 

 

Symptom

Possible Cause

Solution

 

 

 

 

Lamp Burned Out?

Test the lamp in a fixture which is operating properly.

 

Replace if necessary.

 

 

 

 

Inspect lamp base to see if there is arcing at center

 

Lamp Loose in Socket?

contact button. Tighten lamp snugly. Check socket for

 

 

damage. Replace if defective.

 

 

 

 

Floodling Plugs Not Tight?

Check plug and receptacle. Tighten if loose.

 

 

 

 

 

Interchange ballast plugs in generator enclosure.

 

Defective Ballast?

If lamp starts, replace ballast. Check ballast wiring

 

against diagram. Check for swollen capacitor, charred

 

 

 

 

wiring, core and coil or other signs of excessive heat.

 

 

Check line voltage at ballast input. Voltage should

 

Low Voltage?

be within 10% of nameplate rating when operating

 

at normal load. Increase supply voltage or remove

 

 

 

 

external load.

Lamp will not start.

 

 

 

Proper HID lamps will perform erratically or fail to

 

 

start on an improper ballast. The ballast nameplate

 

Improper Ballast?

data must agree with the line voltage and lamp used.

 

Improper ballast causes lamp failure. Note: Mercury

 

 

 

 

lamps of the same wattage will operate properly on

 

 

Metal Halide ballasts.

 

 

Operating position should agree with the lamp tech.

 

 

A BU-HOR lamp can be operated base up vertical to

 

Improper Lamp Operating

and including the horizontal and a BD can be operated

 

Position (Metal Halide only)?

base down vertical to, approaching, but not including

 

 

the horizontal. A lamp operated beyond the specified

 

 

position may not start.

 

 

 

 

 

HID lamps (High Pressure Sodium, Metal Halide,

 

Lamp has been Operating: Cool

Mercury Vapor) require from 4 to 8 minutes cool-down

 

Down Time Insufficient?

time before restarting. Switch off breaker and allow

 

 

lamp to cool.

 

 

 

 

 

Improper ballasting can cause flickering or erratic

 

Improper Ballast?

operation. In the start-up period the lamp may ignite,

Lamp flickers and goes

 

start to warm up and then extinguish (cycle).

out intermittent or

 

Under certain conditions new lamps may "cycle".

cycling.

New Lamp?

Usually after 3 tries to start at 30 to 60 second

 

 

intervals, lamps will stabilize and operate satisfactorily.

 

 

 

 

Defective Lamp?

Replace lamp.

 

 

 

LT12Dab LIGHT TOWER • operation manual — rev. #0 (06/03/11) — page 39

Page 39
Image 39
Multiquip LT12DAB operation manual Lamp Troubleshooting

LT12DAB specifications

The Multiquip LT12DAB is an innovative and reliable light tower designed to deliver efficient lighting solutions for various outdoor applications. Known for its robust construction and user-friendly features, the LT12DAB is ideal for construction sites, events, and emergency situations, providing flexibility and performance in a compact package.

One of the standout features of the LT12DAB is its powerful lighting system. It is equipped with four high-intensity LED lights, each delivering up to 12,000 lumens, ensuring ample illumination for expansive areas. The LED technology not only enhances visibility but also offers advantages in power consumption, resulting in reduced energy costs and longer operational life. The tower can be raised up to 30 feet, enabling it to cast a broad beam of light across large outdoor spaces.

The LT12DAB is built with advanced mobility in mind. It features a durable, weather-resistant frame that can withstand various environmental conditions, making it suitable for use in diverse locations. The all-terrain wheels provide enhanced maneuverability, allowing operators to transport the unit easily across job sites or uneven terrains. Additionally, the lightweight design ensures that it can be easily handled by a small crew.

Powering the LT12DAB is a reliable and fuel-efficient diesel generator that provides extended run times without frequent refueling. This generator not only supports the lighting system but can also power additional tools and equipment, adding versatility to its functionality. The unit is designed with low noise emissions, making it ideal for operation in noise-sensitive areas.

Ease of use is paramount in the design of the LT12DAB. The intuitive control panel allows users to operate the lights and generator effortlessly. The telescopic mast can be raised or lowered quickly, with safety features in place to prevent accidental collapse. Moreover, the integrated sensors monitor the oil levels and engine temperature, providing alerts for maintenance needs.

In summary, the Multiquip LT12DAB combines powerful lighting capabilities with robust construction and user-friendly features. Its mobility, energy efficiency, and reliability make it a valuable tool for any outdoor project, ensuring that worksites remain well-lit and safe, regardless of the conditions. Whether for construction, events, or emergencies, the LT12DAB stands out for its performance and adaptability, meeting the demands of today’s professional environments.