MOONLIGHT LIGHTING SYSTEM — OPERATION

ELECTRICALCONNECTIONS(MB150/MB400/MB400B/ MB1000)

1.Insert the female end of the ballast cable (Figure 30) into the connector on the lamp fixture.Insert the male end of the ballast cable into the female connector on the ballast.

BALLAST

CABLE

BALLAST

Figure 30. Connecting the Ballast Cable

1.Make sure the power ON/OFF switch (Figure 31) located on the ballast is in the OFF position.

ON/OFF SWITCH

1

0

Figure 31. Power OFF/ON Switch

2.Plug the power cable from the ballast to a 110V/60 Hz power source (Figure 32).

MOONLIGHT

RECEPTACLE

POWER CABLE

 

EXTERNAL

(110 VAC/60 Hz)

POWER SOURCE

Figure 32. Connecting to 110 VAC Receptacle

DANGER - Electric Shock Hazards

ALWAYS keep electrical cords in

WET

HANDS

good condition. Worn, bare or

 

frayed wiring can cause electrical

 

shock, thus causing Bodily Harm

 

or even Death.

POWER

CORD

NEVER grab or touch a live power (POWER ON)

cord with wet hands, the possibility exists of Electrical

Shock, Electrocution, and even Death!

3.Place the ON/OFF switch to the ON position to turn on lamp. The lamp should flicker for a few minutes as the internal gases warm up. It should reach full power within 4 minutes.

Shutdown

1.Place the power ON/OFF switch (Figure 31) in the OFF position.

ELECTRICALCONNECTIONS(MB1000W)

1.Plug the power cable from the MB1000W directly to a 110V/60 Hz power source (Figure 32).The lamp should automatically light.

2.To turn off lamp, diconnect power cable.

CAUTION - LAMP COOL DOWN

Allow a sufficient amount of time (15-20 minutes) for the lamp to cool down before attempting to disassemble unit.

MOVINGTHE BALLOON

1.When moving balloon around, make sure that the pole or mast is lowered to the shortest height possible and make sure pole or mast is securely fastened.

DANGER - Overhead Obstructions

When moving the Moonlight, ALWAYS be on the lookout for overhead obstructions such as high voltage power lines. The possibility exists of electrocution, even death if the MOONLIGHT comes in contact with high voltage power lines!

MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 23

Page 22 Page 24
Page 23
Image 23
Multiquip MB400B, MB150 manual ELECTRICALCONNECTIONSMB1000W, Movingthe Balloon
Page 22 Page 24

MB1000, MB1000W, MB150, MB400, MB400B specifications

Multiquip has established itself as a leading manufacturer of construction equipment, renowned for its commitment to innovation and quality. Among its impressive lineup, the MB400B, MB400, MB150, MB1000W, and MB1000 stand out for their performance and versatility.

The Multiquip MB400B is engineered for high productivity and reliability in compact construction applications. This walk-behind concrete trowel features a robust engine, providing smooth operation and excellent surface finishing capabilities. With its durable construction and user-friendly design, the MB400B is suitable for both professionals and DIY enthusiasts who require precise finishing in decorative concrete work.

The MB400 shares many similarities with the MB400B but is distinguished by enhanced features for specific job site requirements. With a powerful engine and adjustable trowel speed, the MB400 excels in achieving high-quality finishes on industrial and commercial projects. Its lightweight design allows for maneuverability in tight spaces, ensuring optimal performance wherever needed.

On the other hand, the Multiquip MB150 is a compact trowel designed for smaller jobs, offering high maneuverability without sacrificing performance. The MB150 caters to contractors seeking a balance between size and power, making it ideal for residential applications. Its user-friendly controls ensure easy operation, and its construction offers durability to withstand the demands of everyday use.

The MB1000W is an advanced walk-behind trowel, featuring a powerful water-cooled engine that provides consistent performance across various conditions. Designed for larger paving jobs, it boasts enhanced stability and a wider trowel blade, promoting efficiency in achieving flawless concrete surfaces. The water-cooled engine ensures optimal operation even in challenging environments, making it a reliable choice for professionals.

Finally, the Multiquip MB1000 represents the pinnacle of trowel technology. This walk-behind model excels in high-performance applications, with precision-engineered components designed for maximum durability and efficiency. Its advanced control system allows for seamless adjustments during operation, delivering increased productivity on job sites. The MB1000 is ideal for heavy-duty tasks, making it a favorite among contractors requiring superior performance.

In summary, the Multiquip MB series, including the MB400B, MB400, MB150, MB1000W, and MB1000, combines innovative technology with robust design. Each model caters to specific user needs, bridging the gap between performance, efficiency, and ease of use—making Multiquip a trusted name in concrete finishing equipment.
Top Page Image Contents