MOONLIGHT LIGHTING SYSTEM — RULES FOR SAFE OPERATION
DANGER - MOONLIGHT Electric Shock Hazards
ALWAYS keep electrical cords in good condition.Worn, bare or frayed wiring can cause electrical
shock, thus causing Bodily Harm or even Death.
NEVER grab or touch a live power cord with wet hands, the possibility
exists of Electrical Shock, | POWER |
CORD | |
Electrocution, and even Death! | (POWER ON) |
|
NEVER operate the MOONLIGHT or handle any electrical equipment while standing in water, while barefoot, while hands are wet, or in the rain. A dangerous electrical shock could occur causing
Severe Bodily Harm or even
Death.
Maintenance Safety
■NEVER lubricate components or attempt service on a running
MOONLIGHT.
■ALWAYS allow the MOONLIGHT a proper amount of time to cool before servicing.
■Keep the MOONLIGHT in proper running condition.
■Fix damage to the MOONLIGHT immediately and always replace broken parts.
■ALWAYS use the required tool for the job application. Using damaged or worn tools or using tools inappropriate for the required application is very dangerous, and may cause damage to
the machine and
service personnel. Make sure to use the appropriate tool for the specific job.
Emergencies
■ALWAYS know the location of the nearest fire extinguisher.
■ALWAYS know the location of the nearest first aid kit.
DANGER - MOONLIGHT Overhead Obstructions
ALWAYS make sure the area above MOONLIGHT is open and clear of overhead power lines and other obstructions.
The tower extends in excess of 16 ft. (5 meters). Contact with overhead power lines or other obstructions could result in equipment damage, Serious
Injury or Death!
■In emergencies always know the location of the nearest phone or keep a phone on the job site. Also know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in case of an emergency.
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 7