MOONLIGHT LIGHTING SYSTEM — SETUP
DANGER - Mounting Accessory Tipping
ALWAYS make sure that the mounting pole, cart, stand or tripod is properly secured to prevent tipping! Use sandbags or stakes to secure the mounting accessory as necessary.
MAST HEIGHT ADJUSTMENT (MBC and MBS)
1.To adjust the height of the mast on the MBC cart or MBS stand, rotate the winch handle until the mast is at the desired height (see Figure 28).
POLE HEIGHT ADJUSTMENT (MBP)
1.To adjust the height of the pole, loosen the height ad- justment knob (see Figure 27) on the MBP mounting pole and slowly pull up the inner pole to the desired height. Tighten the height adjustment knob.
PULL OUT
INNER POLE
TO ADJUST
HEIGHT
KNOB
ROTATE
WINCH HANDLE
Figure 28. MBC and MBS Mast Height Adjustment
CAUTION - Mast Safety
When raising or lowering the mast, keep hands and fingers clear of the various mast sections, this will prevent hands and fingers from getting pinched.
POLE HEIGHT ADJUSTMENT (MBT)
1.To adjust the height of the pole on the MBT tripod, re- move the pin that holds the pole in place and loosen the knob (see Figure 29). Adjust the pole to the desired height and tighten knob to secure pole. Put back the pin to lock pole in place.
Figure 27. MBP Pole Height Adjustment
CAUTION - Pole Safety
When raising or lowering the pole, keep hands and fingers clear of the section between the pole and the inner pole. This will prevent hands and fingers from getting pinched.
LOOSEN KNOB TO
ADJUST POLE HEIGHT
REMOVE PIN TO
RELEASE POLE
Figure 29. MBT Pole Height Adjustment
PAGE 22 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)