Safety Information
general poWer Tool SaFeTy WarningS
Warning
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
NOTICE
The term "power tool" in the warnings refers to your
WorK area SaFeTy
NOTICE
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
do noT operate power tools in explosive atmospheres, such as in the presence of fl ammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
alWayS clear the work area of any debris, tools, etc. that would constitute a hazard while the equipment is in operation.
No one other than the operator is to be in the working area when the equipment is in operation.
do noT use the equipment for any purpose other than its intended purpose or application.
This equipment should only be operated by trained and qualifi ed personnel, 18 years of age and older.
Whenever necessary, replace nameplate, operation and safety decals when they become diffi cult read.
Manufacturer does not assume responsibility for any accident due to equipment modifi cations. Unauthorized equipment modifi cation will void all warranties.
never use accessories or attachments that are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.
alWayS know the location of the nearest 
fire extinguisher.
alWayS know the location of the nearest first aid kit.
alWayS know the location of the nearest phone or keep a phone on the job site. Also, know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency.
MoTor and FleXSHaFT SaFeTy
danger
alWayS wear rubber insulated gloves and boots when holding the fl exshaft during operation. The possibility of electrocution exists causing equipment damage and severe bodily harm even death!
danger
If applicable, periodically check insulation resistance. The possibility of electrocution exists causing equipment damage and severe bodily harm even death!
Warning
never attempt to run the core outside the casing assembly for any reason.
CauTion
do noT carry
never carry the motor by the cord. Use the carrying handle.
alWayS check the vibrator motor for loosened hardware such as nuts and bolts before starting.
Keep the cord from heat, oil, and sharp objects.
do noT overload the motor. It will do a better and safer job at the rate for which it was designed.
mgx Series • operation and parts manual — rev. #0 (03/26/12) — page 7
