operation
START-UP
CAUTION
DO NOT attempt to operate the saw until this manual has been read and thoroughly understood. Engine operating steps may vary. See included engine manufacturer's operating manual.
CAUTION
Ensure the work area is clear of tools, debris, and unauthorized people.
NOTICE
The Engine Stop Switch located on the handlebar (Figure 16) serves both as an Emergency Engine
ENGINE STOP SWITCH
(Emergency Stop
and Primary ON/OFF)
ENGINE STOP
SWITCH
(Secondary ON/OFF)
Figure 16. Engine Stop Switches
DANGER
NEVER operate the saw in a confined area or enclosed structure that does not provide an ample free flow of air.
WARNING
NEVER place hands or feet inside the belt guard or blade guard while the engine is running. ALWAYS shut the engine down before performing any kind of maintenance service on the saw
ALWAYS wear approved eye and hearing protection while operating the saw.
1.Keep Wheel Clamp applied (lever DOWN) until completely ready for cutting operation.
Figure 17. Parking Brake
2.Ensure the diamond blade has been mounted correctly and that it is raised above the surface you are about to saw.
3.Place the fuel valve lever (Figure 18) to the "ON" position.
page 28 — SP118 Pavement Saw • operation manual — rev. #1 (05/03/12)
