decommissioning/water tank (optional)

Decommissioning SAW/Components

Decommissioning is a controlled process used to safely retire a piece of equipment that is no longer serviceable. If the equipment poses an unacceptable and unrepairable safety risk due to wear or damage or is no longer cost effective to maintain, (beyond life-cycle reliability) and is to be decommissioned, (demolition and dismantlement), the following procedure must take place:

6.Drain all fluids completely. These may include oil, gasoline, hydraulic oil and antifreeze. Dispose of properly in accordance with local and governmental regulations. Never pour on ground or dump down drains or sewers.

7.Remove battery (if applicable) and bring to appropriate facility for lead reclamation. Use safety precautions when handling batteries that contain sulfuric acid,

8.The remainder can be brought to a salvage yard or metal reclamation facility for further dismantling.

WATER TANK KIT (OPTION)

An optional water tank kit, (P/N SP1WK) is available for use with the SP118 Saw. See assembly instruction sheet p/n 38265 for the assembly of the kit onto your saw.

The illustration shown below is provided for reference.

5/16 x 1”

5/16 x 1”

5/16 x 3/4”

Figure 26. Water Tank Kit (Option)

page 34 — SP118 Pavement Saw • operation manual — rev. #1 (05/03/12)

Page 34
Image 34
Multiquip SP118 operation manual Decommissioning/water tank optional, Decommissioning SAW/Components, Water Tank KIT Option