Multiquip WM63H8 Adjust if necessary, Replace seals, Defective or worn drum support, Brackets?

	troubleshooting
	Mixer Troubleshooting
	Worn or defective V-belt?	Replace V-belt.
Blades will not rotate.	Adjustment lever mis-aligned?	Check position of adjustment lever.
		Adjust if necessary.
Material leaking from drum ends.	Worn or defective paddle shaft seals?	Replace seals.
	Defective or worn drum support	Apply grease to bracket or replace.
	brackets?
Drum difficult to discharge (tilt)
	Blades adjusted too tight.	Adjust blades until they almost touch
		side walls of drum.

page 36 — wm63-series Mixer • operation and parts manual — rev. #0 (09/27/12)