Multitech MT1432BA, MT2834BAI manual S29, S30, S32, S34, S36, S37

MultiModemBA User Guide

S-REGISTER	UNIT	RANGE	DEFAULT	DESCRIPTION
S29	1	1-255	20	Specifies the amount of idle time can elapse
				between AT commands after the SETUP
				password has been entered
S30	min 0-255		0	Inactivity timer used to disconnect modem.
S32	100mSec	0-255	20	Sets time that modem waits for a
				<RETURN> to be entered during escape
				sequence execution.
S34	ASCII	0-60	10	Buffer size for number of characters in AT
				command string after on-line escape
				sequence, before buffer is cleared and
				escape sequence aborted.
S36	1 second	0-255	0	S36 sets the time between DTR inactive and
				the modem going off-hook (busy-out).
S37	1 second	0-255	5	S37 sets the time allowed DTR active and
				the modem responding on-hook (not busy).
* S48	N/A	33, 31,	0	S48 sets maximum speed modem connects
		28, 26, 24,		within scope of Enhanced V34
		21, 19, 16,		mode (e.g., S48 = 21 means
		14, 12, 96		maximum connect speed is
		and 48		21.6K)‡ . This register is useful when line
				conditions will not support higher V34
				speeds. The default value is 0, which
				indicates a connection attempt of 28.8K.

‡ lower speeds are still enabled.

*2834 Series only

144