Multitech MT2834BAI, MT1432BA manual Manual Dial and Automatic Answer, Command Mode, Registers

Chapter 4 - Manual Dial and Automatic Answer

4.1	Introduction	36
4.2	Dialing/On-Line/Answering	36
4.3	Manual Call Origination	37
4.4	Automatic Answering	37
4.5	Manual Answering	38
4.6	Handshaking Details	38
4.7	Call Termination	39

Chapter 5 - Command Mode

5.1	Introduction		42
	5.1.1	AT Command Editing	42
	5.1.2	Functional Modes	43
5.2	Summary of AT Commands		44
5.3	Result Codes		47
5.4	Dialing Commands		49
	5.4.1	Dialing Action Commands	49
	5.4.2	Dial Modifier Commands	50
	5.4.3	Phone Number Memory Commands	53
	5.4.4	Configuration and Default Storage Commands	54
	5.4.5	Command Response (Result Code) Commands	56
	5.4.6	Phone Line Conditioning Commands	58
	5.4.7	RS-232C Interface Control Commands	61
	5.4.8	Error Correction Commands	63
	5.4.9	Flow Control Commands	66
	5.4.10 Compression, Error Correction, Flow Control, Pass-Through and Pacing Commands		69
	5.4.11	Speed Conversion Commands	70
	5.4.12	Immediate Action Commands	73
	5.4.13 Line Probe Commands (2834 Series only)		75

Chapter 6 - S-Registers

6.1	Introduction		78
6.2	Reading and Assigning S-Register Values		84
	6.2.1	Examples of Assigning Values	84
	6.2.2	Examples of Reading Values	84
6.3	AT Command and S-Register Summary		85

Chapter 7 - Callback Security and Remote Configuration

7.1	Introduction	88
7.2	Callback Feature Description	88
7.3	Remote Configuration Description	89
	7.3.1 Initial Setup Procedures for Callback and Remote Configuration	89
	7.3.2 Remote Configuration Procedures	92
7.4	Remote Configuration and Callback Security AT Commands	93
7.5	Remote Configuration/Callback Security S-Registers	95

iv