38
Models MT5600ZDX & ZDXV
Command: SnRead/Write Register Value
Values: n, v, or ?
Default: None
Description: The modem selects an S-Register, performs an S-
Register read or write function, or reports the value
of an S-Register:
nEstablishes S-Register n as the last
accessed.
n=v Sets the S-Register value.
n? Reports the value of S-Register n.
For example:
ATS7 establishes S7 as the last accessed register.
AT=40 sets the contents of the last register accessed
to 40.
ATS=20 sets the contents of the last register access-
ed to 20.
Command: VnTerse/Verbose Result Code Format
Values: n = 0 or 1
Default: 1
Description: V0 Displays Result Codes as digits (terse response).
V1 Displays Result Codes as words (verbose response).
Command: WnConnect Message Control
Values: n = 0, 1 or 2
Default: 0
Description: W0 Upon connection, the modem reports DTE speed
only (e.g., CONNECT 56000). Other responses are
disabled.
W1 Upon connection, the modem reports the line
speed, the error correction protocol, and the DTE
speed. Other responses are disabled.
W2 Upon connection, the modem reports DCE speed
only (e.g., CONNECT 28800). Other responses are
disabled.
*The Wn command controls the format of CONNECT messages. The
parameter value, if valid, is written to S31 bits 2 and 3. The Wn command
can be overridden by register S95.